Neoway M660 At Command Manual Download Page 25

Page: 25 / 114

Neo_M660 AT Command Set

AT+CLVL?

+CLVL:4

AT+CLVL=?

+CLVL:0-6

Remarks

The setting of this command is not saved after the module is powered off.

4.2 Mute Control: +CMUT

Description

To set mute control of the voice calls.
The setting is valid during a call

Format



AT+CMUT=<n><CR>



AT+CMUT?<CR>

Parameter

<n>:

0: Mute off

1: Mute on

Return

Value

See the Example.

Example

AT+CMUT=0

AT+CMUT?

+CMUT: 0

Remarks

This command is valid only during a call. ERROR will be returned in any other situations.

4.3 Dialing Command: ATD

Description

To initialize a data, fax, or voice link
For a voice link, the dialing string consists of numbers and modifiers and must end with a
semicolon.

Format



ATD<dial string><CR>



ATD><n><CR>

Parameter

<dial string>:

Phone number

Summary of Contents for M660



















































































































Search results

Summary of Contents for M660

Reviews:

Related manuals for M660

Brands by name

Popular brands

Neoway M660, At Command Manual

Search results

Summary of Contents for M660

Reviews:

Related manuals for M660

Brands by name

Popular brands