Neousys Nuvo-7160GC Series, User Manual

Page: 98 / 159

Nuvo-7160GC/ Nuvo-7164GC Series
98
3.7.3 Powering On Using Wake-on-LAN
Wake-on-LAN (WOL) is a mechanism to wake up a computer system from a S5 (system off
with standby power) state via issuing a magic packet. The system’s Wake-on-LAN compatible
GbE port is shown below.
NOTE
Please make sure the Intel chipset and Ethernet driver has been properly installed
prior to setting up WOL function.
To enable WOL function, please set up WOL settings in the BIOS and in the operating system
by follow the steps described below.
1. When the system boots up, press F2 to enter BIOS setup utility.
2. Go to the [Power] > [Wake On LAN] and set it to [Enabled] .
3. Press F10 to “ Save changes and
exit BIOS ” and allow the system
boot into the operating system.
4. Once booted into the Windows
system, press “ Windows key + E ”,
right-click on
“ Network > Properties > Change
adapter settings ”. Locate and
double-click on the adapter Intel®
I219 Gigabit Network Connection,
click on Configure...