Nuvo-7160GC/ Nuvo-7164GC Series
157
Appendix B PoE On/ Off Control
The system offers 802.3at PoE+ ports and users are allowed to manually turn on or off the
power supply of each PoE port. This can be useful in power device (PD) fault-recovery or
power reset. The APIs are part of Neousys WDT_DIO driver package. Please follow the
instructions in
Appendix AWatchdog Timer & Isolated DIO
for installation before programming
PoE on/off control function.
GetStatusPoEPort
Syntax
BYTE GetStatusPoEPort (Byte port);
Description
Get current on/off status of designated PoE port.
Parameter
port
BYTE value specifies the index of PoE port. Please refer to the
following illustration,
port
should be a value of 1 ~ 4
Return Value
BYTE value indicating PoE on/off status
0 if port is disabled (off)
1 if port is enabled (on)
Usage
BYTE bEnabled = GetStatusPoEPort (1); //Get on/off status of PoE
Port#1
PoE+ ports on the front panel
Summary of Contents for Nuvo-7160GC Series
