Nuvo-6000 Series User’s Manual
Copyright © 2016 Neousys Technology Inc. All Right Reserved.
Page 75 of 100
4.1.3 Set Link Speed for x8 PCIe Slot
The x8 PCIe slot on Nuvo-6000 is implemented via PCH’s PCI Express port. It supports x4,
Gen2 PCI Express signals. Due to the fact that some off-the-shelf PCI Express add-on
cards support only Gen1 signals only using ASIC/FPGA, users may encounter compatibility
issue. In this case, you can manually set the link speed to eliminate the compatibility issue.
To set link speed for x8 PCIe slot:
4. When Nuvo-6000 boots up, press F2 to enter BIOS setup utility.
5. Go to
[Advanced]
→
[PCI Express Configuration]
→
[x4 PCIe Port]
.
6. Set the
[PCIe Speed]
to a lower speed (Gen1) for the x8 slot.
