Nuvo-6000 Series User’s Manual
Copyright © 2016 Neousys Technology Inc. All Right Reserved.
Page 19 of 100
2.3 Internal I/O Functions
In addition to I/O connectors on the front panel, Nuvo-6000 provides more useful features
via its on-board connectors, such as remote on/off control, LED status output, internal USB
2.0 ports, 12V power and etc. In this section, we’ll illustrate these internal I/O functions.
2.3.1 Status LED Output & Remote On/Off Control
For an application which places Nuvo-6000 inside a cabinet, it’s useful to output the system
status to external LED indicators so that users can check how the system’s running.
Nuvo-6000 provides a 2x6, 2.0mm pitch pin header to output system status such as power,
HDD, watchdog timer, and control system on/off remotely.
The status LED output has a built-in series-resistor and provides 10mA current to directly
drive the external LED indicators. System on/off control is also provided so you can use an
external non-latched switch to turn on/off the system exactly the same as the power button
on the front panel. The following table describes the pin definition of the status LED output.
