Neousys Technology Nuvo-6000 Series User Manual Download Page 59

Page: 59 / 100

Nuvo-6000 Series User’s Manual

Page 59 of 100

3.8 Mount your Nuvo-6000

Nuvo-6000 provides versatile ways of mounting. You can use wall-mounting brackets

shipped with Nuvo-6000 to mount it on a wall or a flat surface. Neousys also offers optional

DIN rail clip to mount Nuvo-6000 on a DIN rail. Or use an optional rack-mounting kit to

install your Nuvo-6000 into a rack. To mount your Nuvo-6000, please refer to the

information listed below.

3.8.1 Mount your Nuvo-6032 on the Wall

1. Get one wall-mounting bracket and four M4 screws from the accessory box. Fix the

mounting bracket to the back side of Nuvo-6032 using four M4 screws.

2. Fix Nuvo-6032 on the wall via the screw holes of the mounting bracket. You can also

take advantage of the keyhole-shaped holes of the mounting bracket to suspend

Nuvo-6032 on the Wall.

Summary of Contents for Nuvo-6000 Series
























































































Search results

Summary of Contents for Nuvo-6000 Series

Reviews:

Brands by name

Popular brands

Neousys Technology Nuvo-6000 Series, User Manual

Search results

Summary of Contents for Nuvo-6000 Series

Reviews:

Brands by name

Popular brands