
Nuvo-6000 Series User’s Manual
Copyright © 2016 Neousys Technology Inc. All Right Reserved.
Page 53 of 100
3. Gently insert the connector of SATA HDD/SSD into the SATA port #1 and make sure it’s
firmly contacted. Secure the HDD/bracket assembly to the SBC using two M3, P-head
screws.
3.5.2
Install 2.5” HDD/SSD to SATA Port #2 & #3 (Nuvo-6032 Only)
SATA port #2 and port #3 are located underneath the backplane via two 22-pin SATA
connectors. You shall use the HDD tray shipped with Nuvo-6032 for the installation of 2.5”
HDD/SSD.
1. Follow instructions described in section 3.1.1 to remove the chassis cover. You can
see the SATA port #2 and port #3 underneath the backplane.
2. Get the HDD tray from the accessory box.
3. Place 2.5” SATA HDD/SSD on the top of HDD tray. Fix them from the opposite side
using eight M3, F-head screws.