Nuvo-5095GC Series User’s Manual
Copyright © 2017 Neousys Technolgy Inc. All Right Reserved.
13
2.2 Front Panel I/O Functions
On Nuvo-5095GC series, plenty of I/O functions are provided on front panel and back panel
so you can easily access them. Most common computer I/O functions are placed on the
front panel. In this section, we’ll illustrate each I/O function on the front panel.
2.2.1 Power Button
The power button is a tact switch for ATX mode on/off operation. To turn on the
Nuvo-5095GC controller, press the power button and the PWR LED is lighted up. To turn off
the Nuvo-5095GC controller, you can either issue a shutdown command in OS, or just
simply press the power button. In case of system halts, you can press and hold the power
button for 5 seconds to compulsorily shut down the system. Please note that a 5 seconds
interval is kept by the system between two on/off operations (i.e. once turning off the
system, you shall wait for 5 seconds to initiate another power-on operation).
