Nuvo-2000+ Series User’s Manual
Copyright © 2013 Neousys Technology Inc. All Right Reserved.
Page 16 of 78
2.2.7 VGA Connector
Nuvo-2000+ offers a standard VGA output
connector on the front panel and supports up to
2048 x 1536 resolution. By BIOS default and
hardware implementation, the VGA output is always
enabled in any case. To achieve best VGA output
resolution in Windows, you need to install
corresponding graphics driver. Please refer to
section 4.3 for information regarding driver
installation.
2.2.8 COM Ports (COM1 & COM2)
Nuvo-2000+ provides four COM ports for
communicating with external devices. COM1 and
COM2 are located on the front panel via 9-pin
D-Sub male connectors. And COM3 and COM4 are
located on SBC via 10-pin box headers. These
COM ports are implemented using industrial-grade
ITE8783 Super IO chip (-40 to 85°C) and provide up
to 115200 bps baud rate.
COM1 is a software-selectable RS-232/422/485
port and COM2 supports RS-232 only. The
operation mode of COM1 can be set in BIOS setup
utility (refer to section 4.1.1 for detail). The following
table describes the pin definition of COM ports.
