Nuvo-2000+ Series User’s Manual
Copyright © 2013 Neousys Technology Inc. All Right Reserved.
Page 43 of 78
3.4 Install the DDR3 SODIMM Module
Nuvo-2000+ provides a 204-pin, SODIMM socket for installing a DDR3 memory module. It
supports a maximal 4GB, 800MHz DDR3 SODIMM module. To install the DDR3 SODIMM
module, please follow the steps listed below.
1. Open the chassis by following step #1 and #2 in section 3.1. The SODIMM socket is
exposed
2. Tile the SODIMM module and insert it to the SODIMM socket on the SBC.
3. As the DDR3 SODIMM module is firmly contacted with socket connectors, press it
down until the clamps of the socket snap into the latching position of SODIMM module.
