Neopost IJ 70, User Manual

Page: 48 / 119

Entering Postage Value and Mail Processing 44
ORIG0017-44
4127388M/C
31/05/2007
4.2.2 Envelopes with dynamic scale in batch mode
- Place an envelope or a stack of envelopes on the feed platform
and press key
START
STOP
: the first envelope is weighed. The rate
calculator defines the corresponding value and displays it.
- Press OK to confirm (or
ESCAPE
to cancel).
- Press
START
STOP
: the whole envelope series is printed at the
defined value.
To stop the batch, press key
START
STOP
again (or wait for a few
seconds until the machine stops automatically when there are no
more envelopes to be processed).
4.2.3 With the feed platform alone
Press key
START
STOP
to start the franking machine. Place one
envelope at a time on the platform, with its upper edge resting
against the side guide and push the envelope towards the franking
machine, until it is fed into the machine.
To stop the envelope feeding, press key
START
STOP
again.
4.2.4 Labels
- Press key ;
- If required, enter the number of labels to be processed (from 1
to 999) at the same value (default number of labels is 1).
- Press on key
START
STOP
: The machine will automatically provide the