Page - 17
AS850 Operating Instructions
7. Double documents fail to divert
Possible cause:
Possible remedy:
i) Documents jamming in diverter
i) Check edges of documents for curling or
damage.
ii) Diverter not working
ii) Solenoid malfunction - contact service
agent.
8. Double document will not set
Possible cause:
Possible remedy:
Documents already held in hold point
Open cover and remove offending document.
If necessary, use 'jog' buttons as described in
section 2.6.
9. Documents jamming on output
conveyor
Possible cause:
Possible remedy:
Roller position on conveyor set
Reset roller as shown in section 2.2.
incorrectly
10. Bad folding or jamming in
folder
Possible cause:
Possible remedy:
Folder rollers need cleaning
Clean folder rollers as in section 3.2.
11. Error message showing on
display panel when there are
no documents in machine
Possible cause:
Possible remedy:
i) Dirty sensors
i) Clean all sensors. Refer to sections 3.2 for
sensor positions
ii) Cover not properly closed
ii) Check both top covers are fully closed
I
SSUE
3
F
EB
2008