Page - 16
AS850 Operating Instructions
3
OPERATOR MAINTENANCE
3.1
OPERATOR'S TROUBLESHOOTING GUIDE
1. Documents not feeding.
Possible cause:
Possible remedy:
Separator gap incorrectly set
Adjust separator as in section 2.1.2.
2. Slow feeding of documents
Possible cause:
Possible remedy:
Feed rollers need cleaning
Clean all rubber rollers as in section 3.2.
3. Documents jam in folder.
Possible cause:
Possible remedy:
i) Side guides incorrectly set
i) Reset side guides.
ii) Documents incorrectly stacked
ii) Check forms and re-stack.
iii) Curled or damaged edges on
iii) Remove damaged documents.
document
4. Documents incorrectly folded.
Possible cause:
Possible remedy:
i) Fold lengths set too long or short
i) Re-measure fold lengths and re-adjust as
shown in section 2.1.3.
ii) Side guides set too wide
ii) Reset side guides.
iii) Documents not square ('skewed')
iii) Adjust squareness of stop as shown in
section 2.1.3.
5. Documents not sealing
Possible cause:
Possible remedy:
i) Defective cohesive on document
i) Test documents from a different batch.
ii) Sealing rollers incorrectly set
ii) Contact service agent.
6. Repeated double documents
Possible cause:
Possible remedy:
i) Separator gap incorrectly set
i) Adjust separator as in section 2.1.2.
ii) Documents sticking together
ii) 'Rifle' document stack.
contd.
I
SSUE
3
F
EB
2008
