Page - 13
AS850 Operating Instructions
2.4
LOADING THE PAPER
2.4.1
Place a stack of documents in the infeed tray, orientated according to fold type
and print direction. Ensure that the leading edges of the stack of forms are
against the feed bridge.
2.4.2
Set the required speed using the speed increase or decrease) buttons. The
speed increments in steps 0-9, as shown on the indicator panel between the
two buttons. The speed may be varied whilst machine is running.
2.4.3
Press the start button and the documents will begin feeding. Note that the count
of the documents fed in and fed out is displayed on the left and right display
panels respectively.
When the run of documents has finished, either or both of the count displays
may be zeroed by pressing 'in count' or 'out count' buttons.
2.4.4
When the document run has finished (or the feeder tray runs out) the machine
will stop operating after about 3 seconds and the message
Error FA1
will show
on the display. Press the stop button to clear the display.
Adjust the back rests to support
the backs of the forms. Further re-
adjustment may be required for
reliable feeding.
NOTE: IN THE EVENT OF ANY EMERGENCY,
PRESS THE RED EMERGENCY STOP KNOB
ADJACENT TO THE CONTROL PANEL.
I
SSUE
3
F
EB
2008
