- 18 -
Set the alarm timer
This unit can be used as an alarm clock. You can select DISC, TUNER or USB as the alarm source.
Caution:
Make sure that you have set the clock correctly.
1. In standby mode, long pressing the
TIMER/SLEEP
button on the remote control for 2 seconds
or more, the “ ” will blink and the source is displayed, e.g. DISC.
2. Press the
H
/
G
buttons on the unit or / buttons on the remote control to select a
source (DISC, USB or TUNER).
3. Press the
TIMER/SLEEP
button to store the setting, the hour digits blink.
4. Repeat steps 2-3 to set the hour, minute and adjust volume.
Note:
* If disc/USB source is selected and the audio cannot be played, TUNER is activated automatically.
* If no button is pressed in 30 seconds, the unit exits timer setting mode automatically.
To deactivate or re-activate an alarm timer
Repeatedly press the
TIMER/SLEEP
button to activate or deactivate timer.
- If timer is activated, “ ” is displayed.
Listen to an external device
1. Connect the AUDIO IN terminals on the rear of
the unit to the headphone socket on the external
device with the MP3-LINK cable.
2. Rotate the
SOURCE
knob on the unit or repeatedly
press
the
SOURCE
button on the remote control to
select
AUDIO IN source. The word “AUDIO IN”
will be displayed on the LED.
3. Start to play on the device (see the user manual of
the external device).
