- 13 -
FM Radio Operation
Caution:
Before listening to the radio, please check that the FM Antenna is correctly adjusted
for length and direction.
Tuning in to a Station
1. Rotate the
SOURCE
knob on the unit or repeatedly press the
SOURCE
button on the remote
control to select TUNER source. The word “TUNER” will be displayed on the LED.
2. Select a station using one of the following methods.
Auto Tuning
Long pressing the
TUN +/-
buttons on the unit or / buttons on the remote control for 2
seconds or more, the frequency changes down or up automatically until a station is found.
Manual Tuning
Repeatedly press the
TUN +/-
buttons on the unit or / buttons on the remote control to
change the frequency until you find the station you want.
Preset Tuning (Available only after the stations are preset)
Repeatedly press the
PRE
+/-
buttons on the unit or / buttons on the remote control to
select the desired preset number. Its band and frequency are displayed on the LED.
Program radio stations
You can program a maximum of 20 preset radio stations (FM).
Automatically
Long pressing the
PROGRAM
button for 2 seconds or more to activate automatic program
mode.
- “AUTO” is displayed on the LED.
- All available stations are programmed.
- The first programmed radio station is broadcast automatically.
Manually
1. Tune to a radio station.
2. Press the
PROGRAM
button on the remote control to activate program mode. The preset
number will blink.
3. Repeatedly press the / buttons on the remote control to select a number from 1–20 for
this radio station.
4. Press the
PROGRAM
button on the remote control again to store the station.
5. Repeat above steps 1 to 4 for each station you want to store in memory with a preset number.
Note:
If the system is unplugged or if a power failure occurs, the preset stations will not be
erased.
To change the FM Reception Mode
Press the
REPEAT
button to select the Stereo or Mono channel to receive the best FM reception
mode.
