Neomatica LLC, Bluetooth sensor ADM35, ADM35H, version 1.1 dd 02.07.2021
14
4.3.2 Manual adding of sensors and checking the list of the sensors added
BLESENSOR
command allows adding the sensors addresses as well as checking the list of
addresses added. The sensor address is indicated on its sticker located on the housing.
When entering the address, no need to put the colon.
BLESENSOR X,Y
– add the address Y in the box X where X=0..4;
BLESENSOR X,0
– clear the box X where X=0..4;
BLESENSOR Y
– add the address Y in the end of the list;
BLESENSOR 0
– clear the list;
BLESENSOR
– display the list of addresses added in the tracker.
Example of commands entering:
BLESENSOR 0,0C61CFEF5E31
– add the address 0C:61:CF: EF:5E:31 in the box 0;
BLESENSOR 0C61CFEF5E31
– add the address 0C:61:CF:EF:5E:31 in the end of the list.
4.3.3 Adding sensors automatically
Adding sensors in a graphical interface of
«ADM Configurator» application.
•
Connect the tracker to the configurator. The connection procedure is described in the
tracker operation manual.
•
Open the
«Peripherals» section.
•
Open the tab
«Bluetooth».
•
Place the sensors close to the tracker.
•
Click
«Autostart» and wait for the complete of the process.
•
The caught sensors will be displayed below.
Summary of Contents for ADM35
Page 1: ......
