Neomatica ADM35, Operation Manual

Page: 21 / 22

Neomatica LLC, Bluetooth sensor ADM35, ADM35H, version 1.1 dd 02.07.2021
21
Annex
В. Instructions for setting up the sensor via «nRF Connect» application
1. Download on your mobile phone a program
«nRF Connect». Open this application. It is
recommended to select Android mobile OS.
2. Put the sensor close to the mobile phone. Recommended distance is up to 1-2 meters.
3. Connect the sensor (black button
«Establish connection» or «Connect» depending on the
system language).
4. If connection failed- try to connect again. The connection will be set up as soon as the
sensor sends the first Advertising message (once per 15 seconds by default).
5. After connection on the home tab you will see 3 blocks:
«Generic Access», «Generic
Attribute
», «Nordic UART Service». Press «Nordic UART Service». The following menu
will appear:
Field RX Characteristic will be used for settings and commands sending. Field TX Characteristic
–
for response;
6. Close to the field TX Characteristic you can see three arrows pointing downwards. Click
onto them, they will appear to be crossed out. Now the sensor is ready to receive your
commands;