Neolt Power Trim Plus 105, User Manual

Page: 6 / 42

GENERAL INFORMATION
Power trim plus
1-2
NEOLT
Conventions 1.4
Conventional terms 1.4.1
Machine: indicates the machine specified in section 1.6 Identification data of the machine.
Frame: structure supporting the machine.
Qualified personnel: people, who thanks to their qualification, preparation and experience,
and thanks to the knowledge of the relevant rules, safety requirements and service norms,
are able to recognize and avoid any possible danger for the people, the material and the
machine.
The description of
direction, sense and position (right side of the machine, left side of the
machine) refers to the operator standing in front of the machine.
Conventional symbols 1.4.2
Text in italic: indicates the title of a chapter, a section, a sub-section, a paragraph, a table, or
a figure of this manual or of another related publication.
1
(example of a generic number): symbolic representation of a command or signaling
device.
A
(example of generic letter): symbolic representation of a part of the machine.
4
Notes contain important information, given outside the text to which they refer.
M
The danger symbols indicate those procedures which, if not respected, could cause physical
damages to the operator. The manufacturer cannot be held responsible for any damages to
people due to noncompliance with these norms.
&
The warning symbols indicate those procedures which, if not respected, could damage the
machines or the devices connected to it. The manufacturer cannot be held responsible for
any damages to objects due to the noncompliance with these norms.