Neolt Power Trim Plus 105, User Manual

Page: 24 / 42

INSTALLATION
Power trim plus
4-8
NEOLT
Location 4.6
Characteristics of the location area 4.6.1
Space requirements
For the normal operation of the machine, loading and unloading operations included, the
needed space depends on the size of the media to be cut
.
Protection against atmospheric agents
The machine must be placed indoor in a room protected from the direct contact wit the
atmospheric agents.
Floor requirements
Prepare an horizontal supporting plane where to install the machine, taking into account the
weight of the machine itself and of all the ancillary devices.
&
Optimal stability condition ca be achieved with a maximum planarity error of ± … mm/m.
Illumination
For a proper operation and maintenance of the machine, a good illumination is required
(approximately 200 - 600 lux).
Environment features
•
Allowed temperature from 18°C to 35°C
•
Allowed relative humidity: from 30 % to 80 %.
Testing 4.6.2
Before attempting the normal and continuous operation of the machine, check its
appropriate general operation by performing some test cuts.
&
In case of malfunctioning, find the reason for this and/or call technical
NEOLT
assistance.