Neolt Power Trim Plus 105, User Manual

Page: 35 / 42

OPTIONAL
CUTTING AREA LAMP
Power trim plus
B-1
NEOLT
Assembly of cutting area lamp – optional B.1
Follow this procedure to position the cutting area lamp:
•
Remove the lamp from
the box and the bag with
the supplied screws
•
Remove the lamp from the lamp holder. (Fig. 1) .
•
Assemble the ceiling lamp to the work table, by fastening the brackets already fixed on the lamp
to the threaded bushes on the upper cross bar in the back part of the table.
(Fig. 2-3) .
Fig. 1
Fig. 2 Fig. 3