Neolt Power Trim Plus 105, User Manual

Page: 39 / 42

TECHNICAL SHEET
REPLACEMENT OF ROTATING
BLADE
Power trim plus
SCH-TEC-3
NEOLT
•
Reposition the elastic ring, using pliers by keeping the blade pressed against the carriage
13
.
•
Position the plate joining the two parts of the carriage on the sliding bar and line up the
holes with the ones on the sliding profile
14
.
•
Position the two parts using the screws previously removed
15
.
•
Turn the carriage over and push the blade over the fixed blade and the sheet holder, also
make sure the rubber is positioned above the Plexiglas sheet holder
16
.
•
Re-insert the two black plugs in the holes on the carriage
17
.
•
Re-insert the two plugs of the carriage and screw them to the carriage using the screws
previously removed
18
.
13 14 15
16 17 18