Chapter
INSTALLATION
NEOFOLD HS
VERSION:
NF.HS-07-03/2015-GB
5-10
Placing of the machine
5.5
Characteristics of the area the machine is placed in
5.5.1
Power supply
The area where the machine is installed must be equipped with the power supply
connections described in
3.2 Power supply data
.
Space requirements
For the normal use of the machine and the loading and unloading operations, it is
important to have an area directly proportional to the size of the media to laminate, or of
the panels for installation, see chapter
Work space 3.1.1
.
Protection from atmospherics
The machine must be placed in a covered room, protected from the direct contact with
atmospherics.
Floor requirements
Prepare the stable horizontal surface of the machine keeping in mind the mass of the
machine itself. Also take into account all extra accessories.
Optimal stability and operating conditions can be obtained with a maximum planarity error
of ± … mm/m. Furthermore, use the four feet to position the machine stabily on the floor.
Furthermore the maximum slope of the floor must not exceed 10°.
Lighting
Good lighting is necessary to safely use and carry out maintenance operations (about 200
- 600 lux), according to standard UNI10380:1994.
Atmospheric characteristics of the area
Temperature: from 18°C to 35°C.
Humidity: from 30 % to 95% without condensate. Ideal humidity ~55%, with max.
temperature 40°C.
General operating features
Do not use the machine in explosive atmospheres
Do not use the machine near acids, corrosive agents, etc.
Do not use the machine by ionizing and non-ionizing radiations (X-rays, microwaves,
ultraviolet rays).
