Chapter
INSTALLATION
NEOFOLD HS
VERSION:
NF.HS-07-03/2015-GB
5-11
Electric connection
5.5.2
Connect the machine to the mains to switch on the folding machine. Only qualified
personnel must carry out this operation.
The machine is powered through a 2.5 meter long (98”) cable and a plug compliant with
the information indicated on the identification label.
Check that the electric line is able to carry the absorption of the machine.
Carefully position the power cable so that it cannot be stepped on or ruined.
Do not put the power cable where it can easily be damaged.
Maintenance and service operations must be carried out only by the technical
assistance authorized by the manufacturer.
Electric hazards. Before making any connections to the mains make sure the system has
been grounded.
Select a mains to supply the machine.
If the sectioning device is the mains plug, the relevant outlet must be easy to access
and not far from the machine.
Power the line that powers the machine.
The power supply system must include the following:
Protection against over-currents, through devices with intervention current, calculated
taking into account the maximum absorption of the machine.
An intervention device for insulation defects (differential) with plate data calculated for
the type of machine.
An external equipotential protection circuit (ground connection) adequate and
compliant with the laws in force in the country of installation of the machine.
Testing 5.5.3
Before using the machine continuously check the general operation of the machine by
doing some sample folds.
If you hear vibrations or unusual noises, immediately switch off the machine and seek the
reason for this consulting chapter
Diagnostics
.
If on the other hand, an alarm code appears on the display, consult chapter
09 Alarm
messages / indications
of this manual
and follow the procedures indicated.
