1.
2.
3.
4.
48
//
7 Motor
The drive wheel of your pedelec can be removed from the bicycle frame at
any time for cleaning purposes or in the event of a flat tyre. Please proceed
extremely carefully during removal and the subsequent assembly. Pay
special attention to the instructions and specifications of the manufacturers
of the various components attached to the wheel, in particular the brake
disc.
Removing the drive wheel
Make a note of the cable routing and the fixing points of the cable ties
before removing the drive wheel. First loosen and remove all cable ties that
attach the cable coming from the motor as well as cables and supply lines
from other components to the bicycle frame.
1.
Open the rim brake, if one is installed.
2.
Shift to the smallest pinion if a derailleur is fitted.
3.
Release the rear wheel from the frame while holding it firmly.
4.
Now remove the torque receiver from the motor and pull the plug out of
the motor. You can now remove the rear wheel completely.
Safety precautions
Pay attention to the mounting position of the torque receiver. When
refitting the wheel later, it must be reattached in exactly the same
position as it was before it was removed.
7.1 Installation and removal of the rear wheel
7 Motor
