LIGHT TOGGLE SWITCH POSITIONS
O:
the light
is
on. Press the external switch to turn off
the light. As long as the switch is pressed, the light remains off.
II:
The light turns on or off depending on the previous switching position. Press the external switch to
turn on or off.
I:
the light
is
off. Press the external
switch to turn
on the light.
As long as the switch
is pulled
in,
the light stays on.
Place accessories & turn them on
Slide a suitable wheel motor into the guides of the rear
port (The effect or liquidwheelbelongs in the front conductor) The wheel motor
does it as soon as it is placed.
Turn on the power by plugging the IEC plug into the IEC contact
on the back of the projector. Turn on the projector in the"I" position with the
switch under the plug. ("O" is the OFF position)
Focus the projection by turning the lens in and out to the
desired sharpness has been achieved. Be careful not to use the lens that far
turns out that it comes loose and falls out of the projector. This can be damaged
and/or injury.
