Electrical connection
- Make sure that plug and cord are not trapped. Make sure you can't trip over the loose cable.
- This product should not be switched to an external switch such as a timer or a switch that turns
on/off regularly.
- When using an extension cable, it must meet at least the same technical specifications as the
projector. Cords with a lower amperage can cause overload.
Use with external switches
To avoid thermal protection problems, this projector should NEVER be switched to external switch as
a timer or a switch that turns on/off regularly. Use a switch with a 3.5 mm mono or stereo jack plug
(a mono plug has 1 black ring around it, a stereo 2). You can optionallyadjust aplug from 6.35 mm to
3.5 mm with an adapter.
Make sure you connect the plug to the correct contact
–
MOTOR or LIGHT. Choose MOTOR when you
want to be able to activate the rotation or effect with an external switch. Select LICHT If you want to
activate the li cht by means of theswitch. Set the switch next to the plug to the correct position.
MOTOR TOGGLE SWITCH POSITIONS
O:
the motor parts are on (ON), operate the external switch
to temporarily switch off. As long as the switch remains
pressed, the parts remain off.
II:
the motor parts turn on or off depending on the previous switching position. Press the external
switch to turn on or off.
I:
the motor parts are off (OFF), operate the external switch to temporarily switch on. As long as the
switch remains pressed, the parts remain on.
