4
MERLIN STEALTH
Installer Options
ENTER PROGRAMMING MODE
Before any of the installer options can be changed, the unit must be in programming mode. To
do so, enter the 6 digit installer PIN followed by the
* 0 #
keys.
•
The keypad will beep seven times if the PIN was correct. The unit is now in
programming mode.
•
If no key is pressed for four minutes, the system will automatically exit the programming
mode. It is better to press the *# key sequence to exit the programming mode.
•
The default installer PIN is
0 1 2 3 4 5
EXIT PROGRAMMING MODE
When finished it is important to exit the programming mode. While in programming mode, you
will be unable to access any user functions from the keypad. Exit from programming mode is
acknowledged by seven beeps.
CHANGE INSTALLER PIN
The default installer PIN can be changed by pressing the
0
key twice, followed by the new PIN
and the
#
key. The keypad will beep six times if the pin was accepted.
•
The new PIN must be 6 digits long.
•
If you cannot remember the PIN, default the unit and use
0 1 2 3 4 5
as the PIN.
Note.
On changing a parameter the keypad will beep in response.
1 beep: fence associated parameter.
2 beeps: gate related parameter.
3 beeps: alarm timing parameter/gate2 input function etc.
4 beeps: battery related.
Summary of Contents for MERLIN STEALTH MASTER
Page 13: ...13 ...
