17
Important:
Only use the hammer drill in hammer mode
when the torque is set to the maximum, and the
hammer symbol on the mode selection ring is aligned
with the single dot on the middle ring, as described in
Reversing the Rotational Direction
The rotational direction switch is used to control the rotational
direction of the hammer drill. The rotational direction can only be
changed when the On/Off trigger is not pressed.
1.
Ensure that the On/Off trigger is not pressed.
2.
Do one of the following:
For drilling and driving in screws, push the rotational
direction switch all the way to the left.
For loosening and unscrewing screws and nuts, push the
rotational direction switch all the way to the right.
To deactivate rotation and only operate the LED
flashlight, push the rotational direction switch to the
middle, which is the neutral position.
Summary of Contents for HD-18-3Li-50
Page 1: ......
