7
Charging the Battery
The Li-ion batteries are supplied partially charged, and must be
charged to full capacity using the battery charger provided with the
hammer drill before using the hammer drill for the first time.
Caution:
Only use the battery charger provided with
the hammer drill. Only this battery charger is matched
to the Li-ion batteries supplied with your power tool.
Danger:
Ensure that the voltage of the power supply
corresponds with the data given on the nameplate of
the battery charger.
Danger:
Only use the charger in a dry environment. The
charger is not waterproof. Never attempt to charge the
battery under water.
A battery can be charged at any time without reducing its service
life. This is because the battery charger detects the charging
condition of the battery, and charges it with the optimum current
according to its temperature and voltage. This lengthens the
battery life, and leaves it fully charged when stored in the charger.
Interrupting the charging procedure does not damage the battery.
1.
Connect the mains plug of the battery charger to an electrical
outlet. A steady green light on the battery charger indicates
that the charger is ready for operation.
2.
Press the battery charger’s CHOGORI connector into the socket
on the top of the battery pack. There is only one way to insert
the CHOGORI connector into the battery socket.
Summary of Contents for HD-18-3Li-50
Page 1: ......
