Nemic-Lambda ZUP10-20, User Manual

Page: 13 / 56

- - - - - -
Kg
mm
- - - - - - - - - - - - - - -
OPERATING TEMPERATURE OPERATING HUMIDITY STORAGE TEMPERATURE STORAGE HUMIDITY VIBRATION (*9) SHOCK WEIGHT SIZE (WxHxD) OUTPUT ON/OFF OUTPUT GOOD OUTPUT VOLTAGE PROGR. OUTPUT CURRENT PROGR. REMOTE SENSING COMMUNICATION INTERFACE
ENVIRON- MENT MECHANI- CAL EXTERNAL FUNCTIONS
SAFETY STANDARDS EMC STANDARDS
APPROVALS
NOTES: * 1 MINIMUM VOLTAGE IS GUARANTEED TO MAXIMUM 0.2% OF THE RATED OUTPUT VOLTAGE. * 2 MINIMUM CURRENT IS GUARANTEED TO MAXIMUM 0.4% OF THE RATED OUTPUT CURRENT. * 3 GIVEN FOR CONTROL OF THE OUTPUT VIA THE SERIAL COMMUNICATION OR VIA FRONT PANEL CONTROLS. * 4 TIME FOR RECOVERY TO /- 50mV AGAINST CURRENT CHANGE OF 50% TO 100%. * 5 INVERTER SHUT DOWN METHOD, MANUAL RESET BY AC INPUT RECYCLING.(OVP WILL SHUT DOWN OUTPUT). * 6 AT 100V/200V AND MAXIMUM OUTPUT POWER. * 7 FOR 200W UNITS - AT COLD START Ta = 25
O
C.
* 8 FOR CASES WHERE CONFORMANCE TO VARIOUS SAFETY SPECS, (UL, IEC ETC.) ARE REQUIRED TO BE DESCRIBED AS 100-240VAC (50/60Hz) ON NAME PLATE. * 9 WHEN MOUNTED WITH MOUNTING SCREWS.
CONDUCTED EMI RADIATED EMI SERIAL OPERATION PARALLEL OPERATION COOLING WITHSTAND VOLTAGE ISOLATION RESISTANCE
ZUP60-
7
3.2
3.2
3.2
3.2
3.2
ZUP60-
3.5
2.9
2.9
2.9
2.9
2.9
ZUP36-
12
ZUP36-
6
ZUP20-
20
ZUP20-
10
ZUP10-
40
ZUP10-
20
ZUP6-
66
0 ~ 50
C: 100% Load.
O
-20 ~ 70
C
O
30 ~ 90% RH ( No Dewdrop ) 10 ~ 95% RH ( No Dewdrop ) Less than 20G 10 ~ 55Hz, Amplitude (sweep 1min) Less than 2G, X,Y, Z, 1 hour each. 70 x 124 x 350. By TTL Signal or Dry Contact - refer to instruction manual Open collector - refer to instruction manual By Voltage ( 0 ~ 4V ) or by Resistance ( 0 ~ 4K ) refer to instruction manual By Voltage ( 0 ~ 4V ) or by Resistance ( 0 ~ 4K ) refer to instruction manual Possible, maximum 0.5V drop on each load wire RS232 and RS485 Built-in, IEEE488 Optional
UL 3111-1, EN61010-1
EN 61326-1, IEC 61326 -1, FCC part 15 (class A) Master - slave method: up to 5 units, refer to instruction manual Up to 2 units, refer to instruction manual More than 100MOhm at 25
C and 70% R.H.
O
EN55022-B, FCC-B, VCCI-2 Forced air by blower fan, (blower fan is mounted within unit) EN55022-A, FCC-A, VCCI-1 Input-Chassis: 2.0kVAC 1 min. Input-Output: 3.0kVAC 1 min. Output-Chassis: 500VAC 1min.
ZUP6-
33
2.1 SPECIFICATIONS: 200W/400W Series continued
8