8
KEN001VKM
v03 • 07.09.2017
EN
STEP 2
The brackets position has been marked on the awning set at factory.
Measure the awning width with a ruler and note the bracket position.
Draw a horizontal line in the position of required height as shown in the diagram by using a
long ruler, spirit level and chalk.
Make marks on the wall, through the holes at the base of the bracket.
The quantity of the wall brackets is based on the awning width.
Awning width
≤ 3,3m
3,3m-4,5m
5,5m-6,0m
Brackets
2 pcs
3 pcs
4 pcs
Bracket
position
Bracket
position
Patio doors
Patio doors
Bracket
position
Chalk line ( use spirit level for accuracy )
Floor
