v04 • 22.05.2017
KEN002EB52
23
EN
POSSIBLE FAULTS
Fault code
Possible cause
Corrective action
Machine does
not work with
full performance
- Machine overloaded.
- Air filter contaminated
- Carburretor incorrectly
adjusted
- Silencer blocked
- Soil too tough
- Clean or replace the air filter
- Contact the customer service
- Clean the outlet of the silencer
Drill rotates at
idling
- Idle speed too high
- Clutch spring broken
- Adjust a lower idle speed
- Replace the spring
Drill rotates but
has no power
- Choke put to OFF
- Carburetor defective
- Gear broken
- Worn clutch shoes
- Put choke to ON once the engine runs
- Contact the customer service
- Contact the customer service
- Replace the clutch shoes and the spring
Drill jumps
- Drill damaged
- Replace by a new drill
Drill cuts only
slowly
- Blunt drill
- Replace the drill or have it sharpened
In the case of other faults please contact the customer service.