NemaVision-iPC NVHMI-707P, User Manual

Page: 45 / 105

45
Signal Name Pin# Pin# Signal Name
Ground 1 2 NC
NC 3 4 SMB_DATA_R
SMB_CLK_R 5 6 ICH_GPIO13_IN1
ICH_GPIO24_IN2 7 8 ICH_GPIO26_IN3
ICH_GPIO27_IN4 9 10 +5V
USB23
：
(Double stack USB type A), Rear USB connector, it provides up to 2 USB2.0 ports,
speed up to 480Mb/s.
USB_23
（
option
）：
(2.0mm Pitch 2x5 Pin Header) ,Front USB connector, it provides one USB port via a
dedicated USB cable, speed up to 480Mb/s.
Signal Name Pin# Pin# Signal Name
5V_USB23 1 2 5V_USB23
USB3_N 3 4 USB2_N
USB3_P 5 6 USB2_P
Ground 7 8 Ground
NC 9 10 Ground
Note:
Before connection, make sure that pinout of the USB Cable is in accordance with that of the
said tables. Any inconformity may cause system down and even hardware damages.
JP5
：
(2.0mm Pitch 2x3 Pin Header),COM5 setting jumper, pin 1~6 are used to select signal out
of pin 9 of COM5 port.
JP3 Pin# Function
Close 1-2 RI (Ring Indicator) (default)
Close 3-4 COM5 Pin9=+5V (option)
Close 5-6 COM5 Pin9=+12V (option)
COM5
：
(Type DB9),serial port, standard DB9 serial port is provided to make a direct connection to
serial devices. COM5 port is controlled by pins No.1~6 of JP5 ,select output Signal RI or
5V or 12v, For details, please refer to description of JP3.