NemaVision-iPC NVHMI-707P User Manual Download

Page: 96 / 105

NV-HMI-7XX User Manual

NOTES:

1. If you use a single VGA output for multiple monitors, please do not use the

Multiple

Monitor

function. Just follow the regular procedure for calibration on each of your

desktop monitors.

2. The Rotating function is disabled if you use the Multiple Monitor function.

3. If you change the resolution of display or screen address, you have to redo

Map Touch

Screens

, so the system understands where the displays are.

About

This panel displays information about the PenMount controller and this driver version.

PenMount Monitor Menu Icon

The PenMount monitor icon (PM) appears in the menu bar of Windows 2000/WIN7 system when you

turn on PenMount Monitor in PenMount Utilities.

PenMount Monitor has the following function

Summary of Contents for NVHMI-707P










































































































Search results

Summary of Contents for NVHMI-707P

Reviews:

Related manuals for NVHMI-707P

Brands by name

Popular brands

NemaVision-iPC NVHMI-707P, User Manual

Search results

Summary of Contents for NVHMI-707P

Reviews:

Related manuals for NVHMI-707P

Brands by name

Popular brands