NemaVision-iPC NVHMI-707P, User Manual

Page: 34 / 105

34
24. USB45
:
USB4/USB5
：
(Double stack USB type A), Rear USB connector, it provides up to 4
USB2.0 ports, High-speed USB 2.0 allows data transfers up to480 Mb/s ,support USB
full-speed and low-speed signaling.
Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.
If the external USB device current exceeds 1.5A, please separate connectors into
different Receptacle.
25. LAN1/LAN2
:
LAN1/LAN2: (RJ45 Connector), Rear LAN port, Two standard 10/100/1000M
RJ-45 Ethernet ports are provided. Used Realtek RTL8111E chipset, LINK LED
(green) and ACTIVE LED (yellow) respectively located at the left-hand and
right-hand side of the Ethernet port indicate the activity and transmission state of
LAN.
26. BUZ1:
Onboard buzzer.
27. LED1
:
LED STATUS. Green LED for Motherboard
Power status.
28. LED2
:
LED STATUS. Green LED for Motherboard
Standby Power Good status.
29. CN1
:
(DF13-40P Connector),For expand output connector, It provides one 18/24bit single
channel LVDS,one Backlight control, two USB ports, one power led, one HDD LED,one
power on/off button, one RESET
.
Function Signal Name Pin# Signal Name Function
LVDS
12V_S0 2 1 12V_S0
LVDS
BKLT_EN_OUT 4 3 BKLT_CTRL
Ground 6 5 Ground
LVDS_VDD5 8 7 LVDS_VDD5
LVDS_VDD3 10 9 LVDS_VDD3
Ground 12 11 Ground
LA_DATAP0 14 13 LA_DATAN0