NemaVision-iPC NV-HMI-717P, User Manual

Page: 92 / 103

NV-HMI-7XX User Manual 92
Multiple Monitors
Multiple Monitors support from two to six touch screen displays for one system. The PenMount drivers
for Windows 2000/WIN 7 support Multiple Monitors. This function supports from two to six touch
screen displays for one system. Each monitor requires its own PenMount touch screen control board,
either installed inside the display or in a central unit. The PenMount control boards must be connected
to the computer COM ports via the RS-232 interface. Driver installation procedures are the same as
for a single monitor. Multiple Monitors support the following modes:
Windows Extends Monitor Function
Matrox DualHead Multi-Screen Function
nVidia nView Function
NOTE: The Multiple Monitor function is for use with multiple displays only. Do not use this function if
you have only one touch screen display. Please note once you turn on this function the rotating
function is disabled.
Enable the multiple display function as follows:
1. Check the Enable Multiple Monitor Support box; then click Map Touch Screens to assign touch
controllers to displays.