NemaVision-iPC NV-HMI-717P, User Manual

Page: 90 / 103

NV-HMI-7XX User Manual 90
Plot Calibration Data
Check this function and a touch panel linearity
comparison graph appears when you have finished
Advanced Calibration. The blue lines show linearity
before calibration and black lines show linearity
after calibration.
Turn off EEPROM storage The function disable for calibration data to write in
Controller. The default setting is Enable.
Setting
Touch Mode This mode enables and disables the mouse
’s ability to drag
on-screen icons
– useful for configuring POS terminals.
Mouse Emulation
– Select this mode and the mouse
functions as normal and allows dragging of icons.
Click on Touch
– Select this mode and mouse only provides
a click function, and dragging is disables.
Beep Sound
Enable Beep Sound
– turns beep function on and off
Beep on Pen Down
– beep occurs when pen comes down
Beep on Pen Up
– beep occurs when pen is lifted up
Beep on both
– beep occurs when comes down and lifted up
Beep Frequency
– modifies sound frequency
Beep Duration
– modifies sound duration
Cursor Stabilizer Enable the function support to prevent cursor shake.
Use press and hold
as right click
You can set the time out and area for you need.