Nematron AESQ67-967 User Manual Download Page 84

Page: 84 / 111

Chapter 5 BIOS



Parallel Port [Enabled]

Use the

Parallel Port

option to enable or disable the parallel port.



Disabled

Disable the parallel port



Enabled

Default

Enable the parallel port



Change Settings [Auto]

Use the

Change Settings

option to change the parallel port IO port address

and interrupt address.



Auto

Default

The parallel port IO port address and interrupt

address are automatically detected.



IO=378h;

IRQ=7

Parallel Port I/O port address is 378h and the

interrupt address is IRQ7



IO=278h;

IRQ=7

Parallel Port I/O port address is 278h and the

interrupt address is IRQ7



IO=3BCh;

IRQ=7

Parallel Port I/O port address is 3BCh and the

interrupt address is IRQ7



Device Mode [Printer Mode]

Use the

Device Mode

option to select the mode the parallel port operates in.

Configuration options are listed below.



Printer Mode

Default



SPP Mode



EPP-1.9 and SPP Mode



EPP-1.7 and SPP Mode



ECP Mode



ECP and EPP 1.9 Mode



ECP and EPP 1.7 Mode

5.3.8

H/W Monitor

The H/W Monitor menu (

BIOS Menu 13

) contains the fan configuration

submenus and displays operating temperature, fan speeds and system

voltages.

Summary of Contents for AESQ67-967
















































































































Search results

Summary of Contents for AESQ67-967

Reviews:

Related manuals for AESQ67-967

Brands by name

Popular brands

Nematron AESQ67-967, User Manual

Search results

Summary of Contents for AESQ67-967

Reviews:

Related manuals for AESQ67-967

Brands by name

Popular brands