Nematron AESQ67-967 User Manual Download

Page: 109 / 111

Appendix E Intel

Matrix Storage Manager

108

Step 7: Configure the RAID settings

. Use the Intel

Matrix Storage

Manager to configure the RAID array. Brief descriptions of

configuration options are given below.

E.4 Installing the Operating System to the RAID Array

To install the operating system to the RAID array some extra steps are

necessary during the installation process.

Step 1: Prepare a RAID driver floppy disk on another computer

. If

installing on the RAID array a RAID driver floppy disk must be made.

The RAID driver floppy disk utility i

s on the CD in the “5-

SATA/Floppy Configuration Utility” folder. The floppy disk will be
formatted and the drivers installed.

Step 2: Restart the system with a floppy drive attached

. Attach a normal

floppy drive or USB floppy drive to the system.

Step 3: Press F6 when prompted

. During the installation process,

Windows OS prompts the user to press F6 to install the RAID drivers.

Press F6 and choose from the drivers on the floppy disk.

Step 4: Install the OS

. Continue with OS installation as usual.

Summary of Contents for AESQ67-967
















































































































Search results

Summary of Contents for AESQ67-967

Reviews:

Related manuals for AESQ67-967

Brands by name

Popular brands

Nematron AESQ67-967, User Manual

Search results

Summary of Contents for AESQ67-967

Reviews:

Related manuals for AESQ67-967

Brands by name

Popular brands