Lubrication and Service
After the irrigation season (Winterization)
1. After verifying to see that the supply hose is not under any pressure, remove supply hose from your RainTrain2
®
. Lift the front of
the unit and cycle the on/off valve control rod in and out several times (see figure 10). This should allow the water to drain from
your RainTrain2
®
.
2. Inspect the three gearbox drain holes. They should be open and the gearbox should not contain any water or foreign material.
3. Store the RainTrain2
®
. away from the direct sunlight. Make sure all openings such as the water inlet and gearbox drain holes
are covered so rodents and insects cannot bring foreign material into the RainTrain2
®
.
14
Figure 10. Winterizing the Machine.
On/Off Valve Control Rod
Summary of Contents for RainTrain2
Page 1: ......