8
Figure 6 - Controller Programming:
Accessing the Hidden Menus
System Start-up w/
Permeate Flush
1 With the System ON,
Press and
Hold
the
Up
and
Down
Arrows.
2 With the
Up
and
Down
Arrows
depressed,
Press
the
System On/Off
button. The menu will switch to the
RO Presets menu shown in Figure 7.
For systems equipped with a Permeate Flush, you must follow the procedure below for proper system start-
up. When there is no Permeate Water in the tank the RO will not start.
1. With the system on,
Press and Hold
the
Up
and
Down
Arrows
2. With the
Up
and
Down
Arrows depressed,
Press
the
System On/Off
button. This will switch to the
Hidden Menus as shown above.
3. If not already on the RO Presets Program,
Press
the
Up
or
Down
Arrows until you reach this screen.
4. Once on the RO Presets Program Screen,
Press
Manual
to Edit this Screen.
5. Press the
Up
or
Down
Arrow to change to
Program 2
6. Once on Program 2,
Press
Manual
to Exit the screen.
7.
Press
System On/Off
to save the changes and return to the Home Page.
Once your Permeate Tank has filled enough to do a proper permeate flush, follow the steps again
changing from Program 2 back to Program 3.
