INSTALLER INSTRUCTIONS
nekos
products have been manufactured in accordance with safety standards and
conforms to the stipulations of current standards in force.
When correctly assembled, installed and used according to the present instructions, they
will not generate any danger for
Symbols used in the manual
DANGER
CONTENTS
Safety indications ................................
Characteristics ................................
Technical and constructional
ID plate and marking data
Schematic connection directions
USER’S MANUAL
1. Description ................................
A - General characteristics
B - I/O Terminal block ................................
2. Operation ................................
2.1. Operation with remote input (radio remote control)
2.2. Operation with local input
3. Definition of the functions
3.1. “Lights Control” mode functions
3.2. “Motor control” mode functions
4. Procedures ................................
Erasing the memory of the RR2
Erasing the radio remote control memory
Erasing a single radio remote control
Selecting the device mode
Programming outputs 1 and 2 (lights mode only)
Programming the operation time
5. Radio procedures ................................
Learning the radio remote controls in lights mode
Learning the first remote control or additio
6. Environmental protection
7. Recall to main principles of warranty certificate
8. Declaration of conformity
3
INSTALLER INSTRUCTIONS
products have been manufactured in accordance with safety standards and
conforms to the stipulations of current standards in force.
When correctly assembled, installed and used according to the present instructions, they
will not generate any danger for persons, animals or items.
Symbols used in the manual
This indication draw the attention about potential
dangers for safety and health of peoples and animals.
................................................................................................
................................................................................................
Technical and constructional information ................................................................
ID plate and marking data ................................................................
Schematic connection directions ................................................................
................................................................................................
General characteristics ................................................................
................................................................................................
................................................................................................
Operation with remote input (radio remote control) ................................
Operation with local input (wall-mounted push-button panel)
Definition of the functions ................................................................
“Lights Control” mode functions ................................................................
“Motor control” mode functions ................................................................
................................................................................................
Erasing the memory of the RR2-M receiver ................................
Erasing the radio remote control memory ................................
dio remote control ................................................................
Selecting the device mode ................................................................
Programming outputs 1 and 2 (lights mode only) ................................
Programming the operation time-out ................................................................
................................................................................................
Learning the radio remote controls in lights mode ................................
Learning the first remote control or additional remote controls in motor mode
Environmental protection................................................................
Recall to main principles of warranty certificate ................................
of conformity................................................................
INSTALLER INSTRUCTIONS
products have been manufactured in accordance with safety standards and
When correctly assembled, installed and used according to the present instructions, they
This indication draw the attention about potential
dangers for safety and health of peoples and animals.
.............................................. 4
................................................... 5
.......................................... 6
................................................................. 7
....................................................... 7
................................................... 9
.......................................................... 9
.................................. 9
..................................................... 9
............................................... 9
button panel) ............................. 10
........................................................... 11
.......................................... 11
........................................... 11
................................................. 12
.......................................................... 12
............................................................. 13
................................... 13
.................................................... 14
................................................. 14
.................................... 15
....................................... 16
................................................ 16
nal remote controls in motor mode ..... 17
............................................................ 18
......................................................... 19
............................................................ 20
S
AFETY INDICATIONS
General notes
ATTENTION:
Before installing this appliance, ensure all safety indications
have been read carefully and understood in order to prevent contact with
electricity, injury or any other incident. The manual should be conserved for
further consultation at a later date
The manufacturer accepts no responsibility for damage to
or things incurred by improper use.
Use for any applications other than those indicated must be authorised by
the manufacturer after technical review of the assembly.
Plastic bags, polystyrene, small metal parts such as nails, staples
placed out of the reach of children as they constitute a potential source of risk.
Do not use solvents or jets of water to wash the appliance. The appliance should
not be submerged in water.
Notes for functioning and use
RR2-M
is a recessed radio receiver module, with 2 control relays, powered directly by the
230V~ (AC) 50/60 Hz mains power system, set up to receive radio commands from the PIK
series transmitter or commands with NEKOS protocol.
This product is designed to be
is chain and rack actuators. Use with any other products may result in damage or
malfunctions.
It is prohibited to open or drill holes in the plastic casing of the product, since
there are live parts under the casing; do not cut or peel the antenna wire as it is
powered by the mains power system.
The receiver has been developed to control single
powered by mains electricity such as lamps or electric motors with powers up t
the specified maximum; any other use is prohibited.
After removing the packaging, check the integrity of the device.
This device is intended only and exclusively for the use for which it was designed,
and the manufacturer cannot be held liable for
The product is powered at a hazardous voltage. All electrical connections must be
made with the power cut off.
The product is intended exclusively to operate inside electrical junction boxes and
thus its casing has no
It is absolutely prohibited to use the product in environments other than those for
which it is intended.
The product must be disposed of in compliance with local environmental
regulations and not as household waste.
4
Before installing this appliance, ensure all safety indications
have been read carefully and understood in order to prevent contact with
electricity, injury or any other incident. The manual should be conserved for
further consultation at a later date.
The manufacturer accepts no responsibility for damage to
incurred by improper use.
Use for any applications other than those indicated must be authorised by
the manufacturer after technical review of the assembly.
Plastic bags, polystyrene, small metal parts such as nails, staples
placed out of the reach of children as they constitute a potential source of risk.
Do not use solvents or jets of water to wash the appliance. The appliance should
not be submerged in water.
Notes for functioning and use
is a recessed radio receiver module, with 2 control relays, powered directly by the
230V~ (AC) 50/60 Hz mains power system, set up to receive radio commands from the PIK
series transmitter or commands with NEKOS protocol.
This product is designed to be used with the manufacturer's original products that
is chain and rack actuators. Use with any other products may result in damage or
It is prohibited to open or drill holes in the plastic casing of the product, since
under the casing; do not cut or peel the antenna wire as it is
powered by the mains power system.
The receiver has been developed to control single-phase electrical equipment
powered by mains electricity such as lamps or electric motors with powers up t
the specified maximum; any other use is prohibited.
After removing the packaging, check the integrity of the device.
This device is intended only and exclusively for the use for which it was designed,
and the manufacturer cannot be held liable for damage due to improper use.
The product is powered at a hazardous voltage. All electrical connections must be
made with the power cut off.
The product is intended exclusively to operate inside electrical junction boxes and
thus its casing has no degree of protection against the infiltration of liquids.
It is absolutely prohibited to use the product in environments other than those for
The product must be disposed of in compliance with local environmental
t as household waste.
Before installing this appliance, ensure all safety indications
have been read carefully and understood in order to prevent contact with
electricity, injury or any other incident. The manual should be conserved for
The manufacturer accepts no responsibility for damage to people, animals
Use for any applications other than those indicated must be authorised by
the manufacturer after technical review of the assembly.
Plastic bags, polystyrene, small metal parts such as nails, staples etc. should be
placed out of the reach of children as they constitute a potential source of risk.
Do not use solvents or jets of water to wash the appliance. The appliance should
is a recessed radio receiver module, with 2 control relays, powered directly by the
230V~ (AC) 50/60 Hz mains power system, set up to receive radio commands from the PIK
used with the manufacturer's original products that
is chain and rack actuators. Use with any other products may result in damage or
It is prohibited to open or drill holes in the plastic casing of the product, since
under the casing; do not cut or peel the antenna wire as it is
phase electrical equipment
powered by mains electricity such as lamps or electric motors with powers up to
After removing the packaging, check the integrity of the device.
This device is intended only and exclusively for the use for which it was designed,
damage due to improper use.
The product is powered at a hazardous voltage. All electrical connections must be
The product is intended exclusively to operate inside electrical junction boxes and
degree of protection against the infiltration of liquids.
It is absolutely prohibited to use the product in environments other than those for
The product must be disposed of in compliance with local environmental
