3
INSTALLER INSTRUCTIONS
nekos
products have been manufactured in accordance with safety standards and
conforms to the stipulations of current standards in force.
When correctly assembled, installed and used according to the present instructions, they
will not generate any danger for persons, animals or items.
Symbols used in the manual
DANGER
This indication draw the attention about potential dangers for safety and
health of peoples and animals.
Contents
1. Security rules ................................................................................................................ 4
2. Formulas and recommendations for installation .......................................................... 5
3. Technical information about function ............................................................................ 6
4. Manufacture and reference standards ......................................................................... 6
5. Label data and markings .............................................................................................. 6
6. Technical data .............................................................................................................. 7
7. Electric power supply .................................................................................................... 7
8. Electric power supply and sensor connection ............................................................. 8
9. Electrical connection ..................................................................................................... 8
10. Open and close commands ......................................................................................... 9
11. Rain detection sensor ................................................................................................ 11
12. Predominance of the commands ............................................................................... 11
13. Programming actuator ............................................................................................... 11
14. Assembly ................................................................................................................... 12
15. Meaning of the LED flashing mode ........................................................................... 15
16. Checking for correct assembly .................................................................................. 16
17. Emergency manoeuvres, maintenance and cleaning ............................................... 16
18. Troubleshooting ........................................................................................................ 17
19. Environmental protection ........................................................................................... 17
20. Certificate of guarantee ............................................................................................. 17
21. Declaration of incorporation (for a partly completed machine) and EC Declaration of
Conformity .................................................................................................................. 19
4
1. SECURITY RULES
C
AREFULLY OBSERVE ALL THE FOLLOWING INSTALLATION INSTRUCTIONS TO ENSURE
PERSONAL SAFETY
.
I
MPROPER INSTALLATION CAN SERIOUSLY ENDANGER SAFETY
.
MANDATORY RISK ANALYSIS AND PROTECTION MEASURES
.
The Nekos electrical actuators comply with the Machinery Directive (2006/42/EC), Standard
IEC 60335-2-103 (Particular requirements for drives for gates, doors and windows) and
other directives and regulations indicated in the attached Declarations of Incorporation and
CE Conformity (at the end of the manual). According to the Machinery Directive, actuators
are “partly completed machinery” intended for incorporation into doors and windows. The
manufacturer/supplier of the window is required, with exclusive responsibility, to ensure the
compliance of the entire system with the applicable standards and to issue CE certification.
We strongly discourage any use of the actuators other than that specified and therefore, in
any case, the supplier of the complete system retains full liability.
For systems installed at a height of less than 2.5 m above floor level or other levels
accessible to users, the manufacturer/supplier of the window must conduct
risk analysis
regarding potential harm (violent blows, crushing, wounds) caused to people by normal use
or possible malfunction or accidental breakage of the automated windows, and to
implement suitable protective measures in view of these. Such measures include those
recommended by the specified standard:
- controlling the actuators via a “deadman’s button” placed near the system and within
the operator’s field of view, to ensure that people are out of the way during operation.
The button must be placed at a height of 1.5 m and operated by key if accessible to the
public; or:
- use of contact safety systems (also included in the actuators) that ensure a maximum
closing force of 400/150/25 N, measured in accordance with paragraph BB.20.107.2 of
IEC 60335-2-103; or:
- use of non-contact safety systems (lasers, light grids); or:
- use of fixed safety barriers that prevent access to moving parts.
Automated windows are deemed adequately protected if they:
- are installed at a height of >2.5 m; or:
- have a leading-edge opening of <200 mm and a closing speed of <15 mm/s; or:
- are part of a smoke and heat evacuation system for emergency use only.
In any case, moving parts of windows that could fall below 2.5 m following breakage of a
system component need to be fixed or secured in order to prevent them from suddenly
falling or collapsing: e.g. the use of safety arms on bottom-hung windows.
The device is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lacking experience and knowledge. Do
not allow children to play with the fixed controls and keep any remote-control units
out of their reach.
The actuator is destined exclusively for installation indoors. For any special
application we recommend you consult the manufacturer beforehand.
After removing packaging, check for any damage on the appliance.
Always request exclusive use of original spare parts. Failure to respect this
condition could compromise safety and invalidate the benefits contained in the
warranty for the appliance.
In the event of any problems or queries, consult your agent or contact the
manufacturer directly.
