Neilsen CT5643, Instructions Manual

Page: 9 / 16

6. ASSEMBLY & OPERATION
LEG INSTALLATION
1. Place cabinet on its back on a table or
Bench.
2. Remove M6 x 12 bolts nuts lock
washer & washers from bolt packet.
3. insert M6 x 12 bolt through leg & into
cabinet.
4. Place M6 washer and M6 lock washer
over bolt and M6 hex nut. Hand tighten.
5. Repeat above for remaining three legs.
FUNNEL, NET AND FRAME
FOUNDATION OF NET INSTALLATION
1. Stand cabinet upright.
2. Place net on funnel.
3. Remove four M6 x 20 bolts and
washers and four hex nuts from bolt
package.
4. Insert four M6 x 20 bolts and washers
through holes in funnel frame foundation
into cabinet. Place washers and nuts over
bolts and tighten.
SHELF INSTALLATION
1. Stand cabinet upright.
2. Remove eight M6 x 12 bolts, 16
washers and eight hex nuts from bolt
package.
3. Insert eight M6xl2 bolts and washers
through holes in leg and shelf, place
washers and M6 lock washers and nuts
over bolts and tighten.
4. Tighten leg bolts and level cabinet.