Neilsen CT5643, Instructions Manual

Page: 5 / 16

operating the cabinet. Use mask when filling hopper. During operation, do not
expose the hands or skin directly in the line of the blast nozzle.
7). Keep the unit lid closed and secured when in use.
8). WARNING! Ensure correct air pressure is maintained and not exceeded.
9). Ensure all components seal properly after assembly.
10). Always keep the blast nozzle directed at the workpiece. Never use outside
the unit and always use with the lid closed.
11). Regularly check that the exhaust vent at the back of the cabinet is clear and
not blocked and that there is space between it and any wall. 1.Check hoses and
air lines for weak or worn condition before each use. Make sure all the
connections are secure before use.
12). Maintain correct balance and footing. Ensure the floor is clean and free from
blasting media spillage. Wear non-slip shoes.
13). Remove ill fitting clothing. Remove ties, watches, rings, and other loose
jewellery and contain and/or tie back long hair.
14). Keep children and non-essential persons away from the work area.
Specific Safety Instructions
1). DO NOT use the cabinet for a task it is not designed to perform.
2). DO NOT operate the cabinet if any parts are damaged or missing as this may
cause failure and/or personal injury.
3). DO NOT operate the cabinet with the lid open.
4). DO NOT stand on the cabinet.
5). DO NOT get the cabinet wet or use in damp or wet locations or areas where
there is condensation.
6). DO NOT operate the cabinet when you are tired or under the influence of
alcohol, drugs or intoxicating medication.
7). DO NOT leave the cabinet operating unattended.
8). When not in use disconnect from the electrical mains and the air supply.
Danger! Chemicals, including lead includes in this product or its
power cord. Wash hands after handling.