5
4. OPERATING INSTRUCTIONS
1. Draw the design on the foam. Or cut a pattern, pin to the foam, and make a
rough trace of the pattern, then remove pattern.
2. Choose your tip and insert into handle, ensure position is secured.
3. Check the voltage of the adaptor is the same as source of current, plug in
adapter to wall socket
4. Always try on test object first before commencing your project.
5. Remove large unwanted chucks first for easier handling to prevent
breakage.
6. Hold the cutter in a comfortable position and cut the design out of the foam
gently. Do not use force. Let the heat do the work.
WARNING
Never use any other type of wire for replacement! May cause damage to adapter!
Use only our replacement wire or use dia. 0.23mm resistance wire.
5. DISPOSAL
At the end of the machine’s working life, or when it can no longer be repaired,
ensure that it is disposed of according to national regulations.
– Contact your local authority for details of collection schemes in your area.
In all circumstances:
● Do not dispose of power tools with domestic waste.
● Do not incinerate.
● Do not dispose of WEEE* as unsorted
municipal waste.
