16
When the selected torque is reached the chuck will stop rotating. The proper
setting depends on the type of material and the size of screw you are using.
Note: Always start on the lowest setting.
The drill symbol gives the highest torque setting and is use when drilling and
for driving larger screws.
LED WORK LIGHT
Caution: Do not look in the light or see the source of light directly.
Pull the On/Off trigger to light up the lamp. The lamp keeps on lighting while
the switch trigger is being pulled. The lamp goes out immediately after
releasing the trigger.
INSTALLING THE BELT CLIP
Before fitting the belt clip set the forward/reverse button to the centre position
or turn tool off and disconnect battery pack.
To reduce the risk of serious personal injury, do not suspend tool overhead or
suspend objects from the belt hook. Only hang the tool’s belt clip from a work
belt.
When attaching or replacing the belt clip, use only the screw that is provided.
Be sure to securely tighten the screw with a Phillips screwdriver.
The belt clip can be attached to either side of the tool using only the screw
provided, to accommodate left or right handed users.
To move belt clip, remove the screw that holds the belt clip in place then
reassemble on the opposite side. Be sure to securely tighten screw.
INSTALLING BITS
Before fitting any drill bits set the forward/reverse button to the centre
position.