14
10-25%
25-50%
50-75%
75-100%
10.
OPERATING INSTRUCTIONS
（
CORDLESS HMAMMER DRILL
）
VARIABLE SPEED CONTROL
(FIG.3)
Simply apply light pressure to the trigger to start the drill on a slow speed.
Increasing the pressure on the switch will increase the speed of the drill.
Note: Your might hear a high pitched noise from the switch during use. Do not
be concerned, this is a normal part of the switch function.
FORWARD & REVERSE SWITCH
This feature is selected via a slide switch located above the trigger, (
FIG.4)
To select direction of the drill rotation simply push the button fully in on the left
side for reverse rotation. To change to forward rotation push the button fully in
on the right side of the handle.