Neilsen CT2728 Original Manual Download Page 10

 

3)  PERSONAL SAFETY 

 

a)  Stay alert, watch what you are doing and use common sense when 

operating a power tool. Do not use a power tool while you are tired or 
under the influence of drugs, alcohol or medication. 

A moment of 

inattention while operating power tools may result in serious personal 
injury.

 

 

b)  Use safety equipment. Always wear eye protection. 

Safety equipment such as dust mask, non-skid safety shoes, hard hat, or 
hearing protection used for appropriate conditions will reduce personal 
injuries. 

 

c)  Avoid accidental starting. Ensure the switch is in the off position 

before plugging in.  

Carrying power tools with your finger on the switch or plugging in power 

tools that have the switch on invites accidents. 

 

d)  Remove any adjusting key or wrench before turning the power tool 

on.  

A wrench or a key left attached to a rotating part of the power tool may 

result in personal injury. 

 

e)  Do not overreach. Keep proper footing and balance at all times.  

This enables better control of the power tool in unexpected situations. 
 

f)   Dress  properly.  Do  not  wear  loose  clothing  or  jewellery.  Keep  your 

hair, clothing and  gloves away from moving parts. 

  

Loose clothes, jewellery or long hair can be caught in moving parts. 

 
 

g)  If  devices  are  provided  for  the  connection  of  dust  extraction  and 

collection facilities, ensure these are connected and properly used. 

 

Use of these devices can reduce dust related hazards. 

  

   

4)   POWER TOOL USE AND CARE 

 

a)  Do  not  force  the  power  tool.  Use  the  correct  power  tool  for  your    

application.  

The correct power tool will do the job better and safer at the rate for which 
it was designed. 

 

b)  Do not use the power tool if the switch does not turn it on and off.  

Any power tool that cannot be controlled with the switch is dangerous and 

must be repaired. 

 

Summary of Contents for CT2728




















Reviews: